ACTION AND DESCRIPTIONThis pregnancy test is for the rapid, visual, and qualitative determination of human chorionic gonadotropin (HCG) in urine for the early detection of pregnancy. INSTRUCTIONS FOR USEThe test and urine must be at room temperature. To start the test, open the package, remove the test from the package, and use it once opened.Hold the test handle with one hand. With the other hand, remove the cap to expose the absorbent strip. Retain the cap for later recapping the test.Hold the test by the handle with the absorbent tip facing downwards. Urinate directly onto the strip for at least 10 seconds. Alternatively, collect the urine in a container (not provided) and immerse the absorbent strip halfway in the urine for at least 10 seconds. Recapping the pregnancy test is also recommended. Wait for the colored bands to appear. Read the result after 5 minutes. Depending on the concentration of HCG in the sample, positive results can be observed in as little as 40 seconds. However, to confirm negative results, it is necessary to wait for the chemical reaction to complete (5 minutes). Do not read the results after 10 minutes. Results: Positive: Two colored bands appear, one in the control zone (C) and one in the test zone (T). Pregnancy is detected. The color intensity of the test bands may vary during pregnancy. Negative: A single colored band appears in the control zone (C), no band appears in the test zone (T). No pregnancy is detected. Invalid: No colored bands are visible, or a red band appears in the test zone (T). If this occurs, repeat the process with a new test.