Jelly Tubes Set for creating three-dimensional figurines.

THE SET CONTAINS:
✔ 6 x liquid gel 150 ml,
✔ book with 16 dinosaur models,
✔ clean foils,
✔ 6 x activator 5 g,
✔ 1 sachet of water crystals 10 g,
✔ bowl,
✔ aquarium with a capacity of 1 liter.

INSTRUCTIONS:
1. Prepare an aquarium with water crystals in which your dinosaurs will live.
To do this, fill the aquarium with water and pour 1 sachet of crystals into it.
The water should be quite warm, but not hot, for the crystals to grow faster.
When the crystals swell, the aquarium will be ready to receive its inhabitants, that is, the dinosaurs that you will create immediately.
2. In the rectangular container included in the set, prepare the activator needed to harden the jellies.
To do this, pour the powder into 400 ml of cold water and stir until completely dissolved.
3. Choose your favorite pattern from the pattern book and cut it out. Then prepare the tubes of gelatin colors you will need for painting.
4. Slowly trace the shape of the model onto the foil, drawing with the gel liquid first on the outlines and then on the internal elements of the model.
Try not to make the gel layer too thick, as too much gel liquid will cause the model to run.
and the gel itself will take a long time to harden. If your model contains small elements, such as eyes or a face,
do them last to avoid them melting too much.
5. Insert the foil with the pattern painted on it into the activator. After about 2 minutes, start moving it gently.
The activator should gradually penetrate under the jelly, causing it to completely peel off.
Repeat this operation for 3-4 minutes, until the jelly completely drains from the foil.
But don't take the dinosaur out yet, keep it in the activator for a while. The longer the jelly stays in it, the harder it will become.
CAREFUL!
Do not leave the foil with the painted dinosaur in the activator for a long period of time without moving it.
It may then turn out that the figurine cannot be detached from the foil, and any attempt to detach it will destroy the effects of your work.
6. Rinse the finished and hardened dinosaur-shaped jelly in clean water to remove any activator residue from its surface.
After such a bath, you can finally play with your dinosaur. And when you're done playing, put it back in the aquarium and start keeping it company.

Package size: 20.5 x 19 x 15 cm
Age: 8+.

IMPORTANT:
The components included in the set have been tested and have all the necessary safety certificates. Does not contain microplastics. MADE IN POLAND.