ACTION AND DESCRIPTION

Thanks to its intui-flow system, it regulates the different variables that can affect the shot.

Anti-colic effect: The equilibrium membrane retroventilation system and the physio teat prevent air ingestion, reducing irritability, regurgitation and colic.

Physiological sucking rhythm: facilitates the natural and individual sucking rhythm so that feeding is constant and regular, without interruptions or choking.

Perfect fit: the teat fits perfectly into the baby's mouth and allows for natural sucking.

Soft-sense silicone: The soft and elastic teat with a soft-sense finish gives the baby a pleasant and natural sensation.

Maximum hygiene and easy cleaning: the base can be unscrewed to make cleaning all parts of the bottle quick and easy.

LATEX ALLERGY

Does not contain latex.

INSTRUCTIONS FOR USE

Cleaning:

- Before first use, boil the product in water for 5 minutes. This is to ensure hygiene.

- Wash the bottle before each use with hot water and common dish soap and rinse thoroughly.

- It is preferable to hand-wash the product, avoiding the use of abrasive products; washing in a dishwasher may accelerate wear.

- When using brushes, be careful not to damage the more delicate parts of the product (e.g., nipple holes and valves).

- Sterilize before use.

- After each wash or sterilization, remove any possible liquid residue.

- Store the product in a clean, dry place.

- The pigmentation of some foods (e.g. tomato sauces) and drinks with intense coloring (e.g. fruit juices) may alter the color of the product. Avoid the teats coming into contact with oil-based foods such as sauces or juices.

Sterilization:

- When boiling or hot sterilizing the bottle, it must always be disassembled and opened to avoid deformation.

- The product can be sterilized cold, using sterilizing solutions, or hot (steam), using specific equipment or by boiling for 5 minutes. If you choose to boil for 5 minutes, avoid contact with the metal walls of the container used.

- The use of ultraviolet (UV) sterilizers is not recommended.

Mounting:

- Check that you have assembled the product correctly before use to ensure proper functioning of the bottle and to prevent possible leaks.

- Heat the bottle

a) To heat the contents, it is advisable to use the appropriate bottle holders after removing the glass from inside.

b) Take extra care when heating in a microwave:

- Only insert the bottle after removing the screw thread and nipple. Risk of explosion.

- If using a microwave oven with a combination grill, make sure the grill is off.

- Always stir heated food to ensure even heat distribution and check the temperature before serving to the child to prevent burning.

c) Do not heat the product in traditional ovens, on glass ceramic hobs or over open flames.

For plastic baby bottles:

- Freezer safe. Remove the nipple and use the storage container.

PRECAUTIONS AND WARNINGS

Always use this product under adult supervision.

Never use the teats as a pacifier.

Continuous and prolonged sucking of fluids can cause cavities. This can occur if the child uses a bottle for an extended period of time and also if sugary drinks are consumed.

Always check the temperature of the food before feeding to avoid burns to the child.

Check the teats before each use, pulling them in all directions. Replace them at the first sign of wear or damage.

In any case, it is advisable to change them at least every two months.

Do not leave teats exposed to direct sunlight or heat, or in disinfectant (sterilizing solution) longer than recommended, as this may weaken the teats.

Check that the flow is adequate for the child's needs, paying attention to any difficulties with sucking or regurgitation of milk from the child's mouth.

Give your child food and drinks, always following the pediatrician's advice and the preparation methods indicated by the manufacturer.

Use only components and spare parts from the NaturaFeeling line.

Keep all unused components out of reach of children.

Remember that breastfeeding is the best food for the child.