- it is a set of 2 tests with an increased sensitivity level of 10 mIU/mL;
- the test includes a color-changing indicator (the color change of the indicator shows that the sample volume is sufficient).

Each test device must be used within one hour of removal from the protective pouch.
1. Take one of the two test devices and allow it to reach room temperature (15-30°C) before use.
2. Remove the protective cap of the test and use one of the following 2 methods for testing:
METHOD 1: Place the absorbent tip of the test device directly into the urine stream for at least 15 seconds.
NOTE: Do not urinate on the result interpretation window.
METHOD 2: Collect the urine sample in a clean, dry container and allow it to reach room temperature (15-30°C) before testing. Insert the absorbent tip (≥2/3) into the collected urine sample so that it is covered at least 2/3 of its length, for at least 15 seconds.
Keep the tip in the urine until the indicator changes color completely (which indicates a sufficient volume of urine).
sample).
3. Put the cap back on the test device and then place the device on a clean, stable surface. Start the timer immediately.
4. Read the result after 3 minutes, do not interpret the result after 10 minutes or more.

Please read all information in the leaflet before performing the test.
Do not use after the expiration date printed on the foil pouch.
Store in a dry place at a temperature between 2-30°C or 35.6-86°F. Do not freeze.
Do not use if the sachet is torn or damaged.
Keep out of reach of children.
For in vitro diagnostic use. Do not administer internally.
Do not open the test envelope until you are ready to begin the test.
The used test should be disposed of in accordance with local regulations.

2 pieces