Sejoy SARS-CoV-2 & Influenza A+B Antigen Combo Rapid Test 1pc

The Sejoy SARS-CoV-2 & Influenza A+B Antigen Rapid Test is used for the qualitative detection of SARS-CoV-2 and Influenza A and B virus antigens.

A rapid nasal test with self-diagnosis. It is easy to use and gives results with >97% accuracy in 15-20 minutes. The sample is taken either with a nasopharyngeal swab or with an oropharyngeal swab . The instructions included are in Greek.

The package includes:

• 1 test cassette
• 1 cotton swab
• 1 outlet tube with dropper cap
• 1 buffer solution
• 1 reagent case

3 possible indications/results:

• Positive: Two red lines appear. One red line appears in the control region (C) and one red line in the test region (T). The color tone may vary, but it should be considered positive even if the line is faint.

• Negative: Only one red line appears in the control region (C) and no line in the test region (T). Negative results indicate that there are no novel coronavirus molecules in the sample or that the number of viral molecules is below the detection level.

• Invalid: No red line appears in the control region (C). The test is invalid even if there is a line in the test region (T). Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control line failure.

Advantages

• Easy to use
• Rapid sampling
• Fast and reliable result

Features

• Rapid detection
• Nasal swab test
• Use only the devices included in the package

Instructions for use

Sample collection
• Place the sealed vial with the extraction solution into the hole in the package.
• Unscrew the vial with the extraction solution and add it to the extraction tube.
• Open the sterile swab package and remove it, being careful not to touch its head with your hand.
• Insert the entire absorbent tip of the swab (1/2 to 3/4 inch) into the left nostril and twist 5 times.
• Repeat the process with the same swab in the right nostril.

Examination process
• Place the sample in the extraction tube.
• Swirl the swab for approximately 10 seconds while pressing against the walls of the tube to release the antigen.
• Add 3 drops of mixed sample into the sample well.
• Check the result after 15 minutes. If you check after 30 minutes or more the result is invalid and must be repeated.