Aeolos is an antistatic inhalation chamber with a one-way valve and is used for the effective administration of inhaled medications. \ using Aeolos significantly reduces the amount of medication deposited in the oral cavity and pharynx and achieves even greater absorption of the medication from the lungs. \ thanks to its small size and the inhalation control technology it applies, Aeolos is your ideal ally in the treatment of asthma. \ \ \ features \ \ - combines two products in one: mask and mouthpiece together. \ \ - bpa free (non toxic plastic). safe non-toxic plastic without bisphenol a. \ \ - small size that makes it particularly easy to use. \ \ - large chamber capacity of 175ml. \ \ - special valve (butterfly type) with reduced resistance that facilitates the intake of the medication. \ \ - exhalation valve on the mask. \ \ - whistle on the back of the chamber that provides notification when the intake is done at a fast/ineffective rate. \ \ - metered dose device (mdi) socket compatible with widely known aerosol medications. \ \ - transparent construction material that allows control of the aerosol inside the chamber. \ \ - available in three mask sizes: infant (0-18 months), child (1-6 years), adult (6+ years) \ \ \ aeolos instructions for use \ \ 1. Before each use, a visual inspection of the inside of the air chamber must be carried out. If any defect is found, the device must be replaced. \ 2. remove the cap from the metered dose inhaler, shake well and insert it into the air chamber. \ 3. apply the mask to the face and make sure that there will be no losses during inhalation. \ 4. Press the metered dose inhaler while ensuring that the patient inhales slowly. If the whistle sound is heard, the inhalation should be done at a slower pace. During inhalation, the inhalation indicator moves towards the patient as he inhales normally. \ 5. The mask should remain applied to the patient's face for 5-6 inhalations with the administration of one spray. \ \ \ aeolos cleaning instructions \ \ 1. Remove the rear part of the air chamber. \ 2. Soak all parts of the air chamber in lukewarm water and a mild cleaning solution. Caution! Avoid rubbing the parts of the air chamber with a cloth or sponge. \ 3. Rinse the parts of the air chamber with clean water. or remove all parts of the air chamber and place them on the top rack of the dishwasher (up to 70°C) in an upright position. \ 4. Place the air chamber parts in a vertical position on a dry surface to dry. Caution! Avoid drying the air chamber parts with a cloth or cleaning paper. \ 5. Before reassembling the air chamber, make sure that all parts are dry. \ \ * the air chamber should be replaced after one year of use. \