Soft contact lens solution for cleaning, lubricating, storing soft contact lenses.

Mode of use

STEP 1: Place the lenses in the palm of your hand, put at least 3 drops of solution on both sides of the eye lenses and gently wipe for 20 seconds.

STEP 2: Each side of the lens is then rinsed thoroughly (about 5 seconds) under a stream of lens solution.

STEP 3: Cleaned contact lenses are placed in a container that is filled with fresh solution. The lenses must remain soaked in the solution for at least 4 hours. After removing the lenses again, it is necessary to pour out the used solution (a fresh solution is always used to maintain the contact lenses). If there is dirt residue on the lenses before they are applied, they should be rinsed with lens solution If the lenses are not applied immediately after they have been removed from the solution, they should be kept in a closed lens container for a maximum of 30 hours. days (the lens solution should not be replaced with normal saline as this does not disinfect). If contact lenses are to be stored for a longer period of time, they should be cleaned and disinfected again with fresh lens solution before being placed in the eye.

Warning: Not suitable for use with thermal disinfection. In case of eye irritation or tearing that persists or increases, or vision deteriorates, discontinue use of the lenses and consult an ophthalmologist promptly. Scald at room temperature. Use only by the expiry date indicated on the package and bottle. Throw away the remaining solution 90 days after opening the bottle. Keep out of reach of children.