Properties:
Rapid immunochromatographic test for vitamin D, with finger prick.

How to use:
Before testing, please read carefully the complete instructions in the leaflet.
1. Wash your hands with soap and rinse with clean warm water.
2. Bring bag to room temperature before opening.
3. Open the bag, remove the test cassette and place it on a clean, flat surface.
4. Perform the test within one hour and best results will be obtained if the test is performed immediately after opening the sealed bag.
5. Remove the pipette, diluent bottle, lancet, and alcohol swab and place them next to the test box.
6. Carefully remove and discard the released lancet cap.
7. Use the provided alcohol swab to clean the tip of the middle or ring finger as the puncture site. Allow to air dry.
8. Press the lancet, on the side from which the cap was extracted; the tip retracts automatically and safely after use. Massage the hand without touching the puncture site, massaging the hand towards the tip of the middle or ring finger to be punctured.
9. Holding your hand down, massage the end that was stung to get a drop of blood.
10. Without pressing the pipette bulb, place it in contact with the blood. Blood migrates into the pipette by capillarity to the line indicated on the dropper. If the blood does not reach the indicated line, you can massage your finger again to get more blood. Avoid air bubbles.
11. Release the collected blood into the sample port (S) of the cassette by depressing the pipette bulb.
12. Wait for the blood to be fully dispensed into the sample port. Unscrew the cap of the diluent bottle and add 2 drops of the substance to the hole (B) of the cassette and start a timer.
13. Wait for the colored line(s) to appear. Read the results after 10 minutes. Compare the intensity of the T line with the color card provided with the kit to get your blood vitamin D level. Do not interpret the result after 20 minutes.

Presentation:
1 piece