The Saro children's nasal aspirator is designed for parents who need help removing excess nasal secretions from their child. The product consists of three parts: two long, thin tubes, one of which is placed in the child's nostril and the other through which the person will aspirate. The capsule connects the two tubes and is where the secretions collect for later removal.

Identifying the correct tube for each task is very easy. One has a thinner tip, while the other has a thicker tip. The thinner tip goes in the nose, and the thicker tip is used for suction.

It is indicated for aspirating nasal secretions in babies and young children. It allows for the removal of excess mucus or nasal secretions in a comfortable, quick, hygienic, and effective way.

It is recommended to use only when the baby's nose is blocked with excessive nasal discharge. The following are the steps to perform nasal aspiration correctly:

• First and foremost, it is advisable to perform a nasal wash with water to loosen as much secretion as possible and make it much easier to aspirate.
• If washing is necessary, the area should be dried so that the baby is not uncomfortable.
• The silicone tip is gently inserted into one of the nostrils.
• While inside, the adult or person responsible for performing the suction should take the other tube and suction.
• Then repeat the process with the other hole if necessary.
• Secretions and waste will be collected in the small capsule that connects both ends of the tubes. This capsule is removable and can be detached and cleaned once the suctioning session is finished or a certain amount has accumulated.
• It is advisable to clean thoroughly to prevent the possibility of bacteria proliferating, either in the capsule or in the tubes.

The person aspirating should not worry about being contaminated or splashed, as the tube through which the aspirate is made is sealed to prevent contamination and to keep secretions out.

Keep away from intense heat sources that could damage the product's physical integrity.

Silicone, PP and PE plastic.