Artelac® Complete Dry Eye Spray from the pharmaceutical brand Bausch + Lom is a medical device formulated to provide comfort and relief to dry, irritated, or tired eyes. Its formulation is suitable for use several times a day, as it is well-tolerated and contains no ingredients that negatively affect the pH balance of the eye area.

Its main function is to moisturize the area where it is applied, as well as provide a refreshing effect that helps relieve eye discomfort, such as tiredness and burning sensations.

It is primarily intended for adults and teenagers who need extra hydration around the eyes or eyelids. Ideal for those who spend a lot of time in front of computers or mobile phones.

It is recommended to use as often as needed, as many times a day as necessary. Although a dose of 1 or 2 sprays per application is recommended, whether on the open or closed eye, or on the eyelids. Below are the step-by-step instructions to follow for correct use of the product:

• Remove the protective diffuser cap from the container by simply pulling upwards.
• If it is the first time or after not using it regularly, it is recommended to spray into the air about 5 to 10 times until a homogeneous pattern appears.
• To apply the product with eyes open, it is recommended to position the diffuser about 10 cm from the eye and to one side of the face. When applying to the eyelid or closed eyes, the 10 cm distance should still be maintained, but the diffuser can be positioned anywhere.
• Once the diffuser is properly positioned, quickly press the pumping mechanism 1 or 2 times and repeat with the other eye if necessary.
• When finished, the diffuser should be quickly covered with the cap that was removed at the beginning to avoid contamination of the formula.

Avoid use on individuals allergic to its components. Do not spray directly onto broken skin. Not suitable for use while wearing contact lenses. Never touch the nozzle tip with your fingers or any other surface.

0.05% sodium hyaluronate, carbomer, glycerol, lipid component, sodium hydroxide and water for injection.