Description

Yoomi Black is a self-warming baby feeding bottle set, suitable for use with both breast milk and formula milk.

Package contents

The set includes a 240 ml anti-colic bottle, a 0 m+ slow-flow teat, a black bottle collar and a warmer.

Product purpose

The products are designed to quickly warm and feed milk to babies, and the included slow-flow teat allows feeding newborns from the first day of life.

Product characteristics

The Yoomi Black set is crafted with the utmost care for baby's safety. The soft silicone nipple and bottle have a total of six holes that prevent air bubbles from entering the milk, preventing colic. The warmer, thanks to its channel system, warms the milk flowing through it to a temperature of 32-34°C, which corresponds to the temperature of mother's milk while preserving all its nutrients. The natural shape of the nipple and the heat it emits resemble a mother's breast, making it much easier for your baby to adapt to bottle feeding.

All components of the set are designed for repeated use. After preparing the food, the warmer will slosh when shaken or will not make a sound. To recharge it, you can boil it in water or use a special capsule , which allows for quick charging in a 700-1200W microwave. When ready to use, the warmer will rattle when shaken, but its lifespan allows it to be recharged up to 300 times.

All products included in the set are made of BPA-free materials.

Product use

Heating milk:
1. Place the collar over the bottle nipple until you hear a gentle click.
2. Place the warmer in the collar and screw on the food bottle.
3. Press the orange button firmly, after a few seconds you will feel warmth.
4. After 30 seconds, put the cap on the bottle and turn it upside down.
5. After another 30 seconds, begin feeding.

If you are feeding without warming the food, place the teat and collar on the milk bottle and close the bottle, leaving a small space between it and the collar.

Charging the heater in boiling water:
1. Boil water in a pot, place the heater in the boiling water so that it is on its side and completely immersed in the water.
2. Cook the device for 30 minutes.
3. Remove and let the warmer cool (75 minutes at room temperature or 20 minutes in cold water).

Charging the warmer in the microwave (in the Yooimi capsule):
1. Place the heater upside down in the capsule and close it carefully.
2. Place the product in the central part of the microwave and heat for 70 seconds (700-750 W power) or 80 seconds (800-1200 W power).
3. Remove the capsule and shake it for 30 seconds.
4. Heat the product for another 30 seconds, then shake it for 10 seconds.
5. Before opening the capsule, wait at least 5 minutes, the heater will be ready for use after it has cooled down completely (75 minutes at room temperature or 20 minutes in cold water).

If you don't know your oven's wattage, heat the product for 70 or 80 seconds (depending on whether you can hear the heater rattling or not), then shake the entire container 5 times. Heat it again for 30 seconds and shake for another 10 seconds. Let it cool.

Sterilization:
1. Place the charged warmer in the sterilizer, add 4 times more water than recommended, then turn on the device for 30 minutes.
2. Remove and let the warmer cool.

Notes and precautions

Before first and each subsequent use, sterilize the bottle and warmer.
Immediately after charging, the warmer's button will turn blue, indicating it is not yet ready for use. Once it cools down, the button will turn orange again.
Once charging is complete, wait at least 5 minutes before opening the capsule.
If the heater overheats, a red stripe of 2 mm or more will be visible, in which case the latches will block the opening of the capsule until the heater cools down.
If a blue liquid appears in the capsule after heating, wait for it to cool completely before touching it. The liquid is a mixture of salt and vinegar and is therefore non-toxic, but it may be hot.
Do not microwave more than one capsule at a time.
After each charge, wash the capsule with cold water and then dry it.