ABS with rubber coating

1. Open the box and remove your MYHIXEL II device.
2. Before using it for the first time, it is necessary to fully charge it. Use only the supplied charging cable. Connect it to the device as shown in the images and plug it into a 5V power adapter for 3-4 hours (you can use your mobile phone charger with the cable we supplied). If this is not the first time you are using it, before charging, make sure the device is completely dry, paying particular attention to the magnetic charging pins.
3. Once charged, disconnect it from the power outlet and press button 2 for at least two seconds. After this time, both buttons will light up, confirming that the device is powered on.
4. How to connect the app to your device:
IMPORTANT: You will not be able to connect your device to the app via Bluetooth until you have first activated your MYHIXEL PLAY. Access the URL on your MYHIXEL PLAY activation card for the complete tutorial.
4.1 To connect the app to the device via Bluetooth, press buttons 1 and 2 simultaneously (2 seconds) until they start flashing simultaneously.
4.2 Open the MYHIXEL Play app and from the main screen, tap "Connect Device". Follow the instructions until the connection is complete.
5. To start heating the device, press button 1. The LED on the device will light up and begin flashing, indicating that it is heating up. After 3 minutes, the LED will stop flashing, indicating that the desired temperature has been reached. However, unless you remove the heating base or press button 1 again, the device will continue heating for another 5 minutes (a total of 10 minutes), reaching a higher temperature. After these 10 minutes, it will automatically stop heating. Therefore, if you want to interrupt the heating process before the 10 minutes are up, simply press button 1 again or open the heating base.
6. Once heated and connected to the app, remove the heating base to access the sleeve. To remove and replace the heating base, always do so straight and vertically, without twisting it. Also, make sure the lid fits correctly and the magnetic pins make contact when closing.
7. We recommend using lubricant with your device. Lubricate the entry hole and the inner channel of the sleeve liberally. Use a water-based lubricant, such as MYHIXEL Lube.
8. IMPORTANT! Before using the device, make sure that the two suction tabs (see the section "MYHIXEL II Device") are open so that you can easily insert your penis without feeling discomfort from the suction effect.
9. The device is ready for use. Insert your penis when it is erect. Once inserted, adjust the suction level to your liking according to your preferred suction intensity by closing one or both of the suction tabs that allow air to escape. Tip: If you have difficulty opening the side tabs with your fingernail, use a sharp object or something similar.
10. Press button 1 to start the device vibrating (the app will tell you when to turn on vibration and when not to). Press it again to turn off vibration. Note that the same button is used for both heating and vibration. Whether the device heats or vibrates depends on whether the cover is in place; it heats with the cover on and vibrates with the cover off.
11. If during penetration you feel that the friction is excessive, apply a little more lubricant, as it should be distributed throughout the entire channel of the sleeve.
12. Relax and enjoy doing the activities guided by your program from the MYHIXEL Play app.
13. Once finished, clean your MYHIXEL II device as indicated in the section “Cleaning and storing the device”.