Mattresses anti-decubitus pads are specially designed to treat and help improve​​ pressure ulcers in patients​ bedridden in hospital or at home .​

• high​ anti-decubitus SHARE equally the Persian on Corps to prevent​ edema ;
• pump commutator PRESSURE of the air in the mattress , creating a feeling of massage easy​ and Enable cells that are immobilized due to positions decubitus ;
• to drink product is indicator and recommended for patients for whom it exists possibility saddle spend may more than 15 hours a day in bed and for patients at risk low to medium risk of causing ulcers​​ and bedsores to be discovered .

Specifications :

Pump : Voltage (V) - Frequency (HZ): AC 220-240 V / 50 HZ;

Air flow : ≥ 5-6 liters/min;

Pressure range: 50 mmHg- 110 mmHg;

Duty cycle : 12 minutes;

Power consumption ≤ 7 W ± 10%;

Noise ≤ 30 dB ± 10%;

Dimensions (WxDxH) 23.5 x 11.7 x 8.1 cm;

Pump weight : 1 kg.

Mattress: Max load: 130 kg;

Material: medically approved PVC;

PVC thickness: 0.3 mm;

Dimensions (WxDxH ): 200 x 90 x 7 cm;

Hose length: 120 cm;

Weight 2 kg

Anti-skid mattress :

- First spread the sheet over the bed mattress, then place the inflatable mattress and make sure that the air intake hole is on the side of the legs.

- Secure the air mattress with the fastening straps under the mattress.

- Spread a thin, breathable material over the inflatable mattress , if the mattress does not come with its own cover, so that it does not come into direct contact with the patient's skin.

Pump :

- Connect the mattress to the pump using the appropriate hoses provided in the package. Before using the mattress on a patient, connect the pump to the power source, press the “ON/OFF” switch and turn the knob to maximum to inflate the mattress.

- When the mattress is fully inflated , you can adjust the pressure range, depending on the user's requirements, using the switch.

- Do not disconnect the hoses while the pump is running .

- Do not use sharp objects near the mattress.

- Do not exceed the maximum load (kg) recommended by the manufacturer.

- Protect the product from oils, lotions and creams by covering it with cotton fabric or a bath towel.

- Clean the upholstery after each daily use. We recommend cleaning the upholstery with a mild detergent to protect it from oil stains and dust , a common practice is to use a spray bottle filled with a mixture of water and antibacterial soap. Spray the surface and then wipe it with a clean towel .

- Protect the coating from scratches , cuts and punctures .

- Do not leave the product running when it is not being used by anyone.

- if the pump becomes damaged or malfunctions, it is necessary to contact the authorized and specialized distributor.

- Do not use the product for a purpose not indicated in this manual.