Product features:

Mikrozid sensitive wipes

Ready-to-use product for cleaning and disinfecting medical devices.

• suitable for alcohol-sensitive medical devices
• suitable for sensitive medical devices
• ready to use

Areas of application:
This product is suitable for cleaning and disinfecting medical devices. Our specialist for sensitive surfaces boasts outstanding material compatibility. Hospitals contain many sensitive materials, which is why mikrozid sensitive combines high efficacy with exceptional material compatibility. Even ultrasound probes* can be disinfected with mikrozid sensitive.

Instructions for use:
Wipe the surface thoroughly with the cloth and allow the disinfectant solution to take effect. Ensure complete coverage. Make sure all visible soiling is removed before disinfection. Treat only small areas. The wiping range depends on the room temperature and the structure of the surfaces to be disinfected. Observe hygienic precautions when opening and threading the first cloth. Ensure the lid is closed after use. Intended for professional use only. Serious incidents related to this product must be reported to the manufacturer and the relevant authorities. Not suitable for terminal disinfection of semi-critical and critical medical devices!

Refilling the can:
First, disinfect your hands and put on fresh protective gloves and a gown. During the refilling process, please ensure that the gloves are not contaminated by other tasks. Transfer the expiration date sticker to the dispenser box. Unscrew the lid, place the refill pouch completely into the dispenser box (shape it to fit if necessary), and cut off the edge of the pouch. Pull the pre-torn wipe from the center of the roll, thread it from below into the designated guide slot in the lid, and pull it through. Disinfect the lid and screw it on. For high-risk areas, Schülke recommends refraining from using refill pouches.

Special notes:
Always read the label and product information before use. The product's suitability with regard to its spectrum of activity must be checked separately. For surface disinfectants: Disinfectants differ, among other things, in their spectrum of activity against microorganisms. This must be taken into account when selecting a suitable product for the respective areas. Please note that there are known cases of bacterial strains that show reduced sensitivity or the development of tolerance to disinfectants. Products based on quaternary ammonium compounds, for example, may not be sufficiently effective in these cases. Therefore, for high-risk areas (such as intensive care, hematology/oncology, neonatology, or burn units), Schülke recommends, for example, Mikrozid PAA wipes or Mikrozid AF wipes for surface disinfection, which cover a particularly broad spectrum of activity due to their properties. Wearing protective gloves is recommended. Further information is available upon request.

Composition:
100 g of solution contain the following active ingredients: 0.25 g Alkyl(C12-16)dimethylbenzylammonium chloride (ADBAC/BKC (C12-16))%%% 0.25 g Didecyldimethylammonium chloride (DDAC), 0.25 g Alkyl(C12-14)ethylbenzylammonium chloride (ADEBAC (C12-C14)).

Source: www.schuelke.com
As of August 2022