The sodium hyaluronate used by Opko has the ability to create a highly adhesive solution, making it an excellent lubricant. Its capacity to form highly viscous solutions further enhances its lubricating properties.

The effect on the synovial joint fluid facilitates movement in the area of ​​the articular heads. It promotes cell regeneration through the moist environment created by the accumulation of the fluid.

The use of Ostenil Plus pre-filled syringe sodium hyaluronate 40 mg/2 ml helps people with knee pain, degenerative conditions, and limited mobility due to injuries or trauma. This treatment is indicated for these conditions and also helps with other synovial joint ailments.

Ostenil Plus should be applied in a sterile environment. The joint area to be treated must be sterilized. Use only if the package contents are suitable according to the distributor's instructions.

Remove the syringe from its packaging and unscrew the built-in Luer lock cap. Attach a hypodermic needle (we recommend 18-25 gauge) and secure it to the tip with a slight twist. Ensure there are no air bubbles in the contents. If present, remove them before applying the treatment.

Apply the Opko pre-filled injection directly into the affected joint. You can perform a total of three applications per week, applying the product to multiple joints simultaneously, depending on your specific needs and concerns.

The only known contraindication is that Ostenil Plus should not be used on individuals with hypersensitivity to any of its components. Regarding side effects after application, it is possible to experience redness, heat, pain, or swelling in the treated area.

If effusion occurs in the joint area as a result of using Ostenil Plus Opko, aspiration is recommended, followed by rest. Farmaciasdirect recommends applying cold to the area for five to ten minutes. Place an ice pack on the affected area, and treatment can be resumed after two or three days.

Opko's Ostenil Plus solution is obtained through a 2.0% fermentation process of its base, which contains 2 ml of sodium hyaluronate solution (pH 7.3), sodium chloride, sodium dihydrogen phosphate, sodium monohydrogen phosphate, mannitol, and water for injection.